1. According to the image processing software to color
The patterns ejected by the direct-injection printing machine generally have a certain color cast from the original photos. Different patterns may have different sizes of the color cast. When the color cast is not within the acceptable range , everyone generally chooses to use image processing software to color-color, common AI, PHOTOSHOP, etc., are all possible. According to it, this test is the basic design skills of the operator, the mastery of the graphics processing software operation, care, work experience, etc. The condition is that you must have someone who knows how to draw.”
2. Toning according to the printing control software
The printing control software matched with the direct-jet printing machine also has a simple color adjustment function, but the scope of this adjustment is relatively limited. It can only adjust the style of the entire picture, such as darker, bluer, and partial color adjustment is not allowed. Adjustment, so as dispensable, is rarely used.
Of course, sometimes, no matter how you adjust the color, you can’t be satisfied. There may be such a situation, and the reasons are as follows:
1. Ink color concentration
If the color density of the ink is low, in the case of printing dark tones, no matter how you adjust it, it will not be able to achieve a satisfactory level. For example, if you want to print deep black, and the black ink has just the right color density Low, no matter how the color is adjusted, the print will always be light black.
2. Curve
When the ink is not matched with the board and RIP software of the direct-jet printing machine, the color cast of the printed pattern will be very large. No matter how you color it, it is impossible to get close. Change the brand and model of the ink After the specification, there is usually such a situation.
3. Waveform
Waveforms also have a great impact on the effect of pattern design, which generally depends on the board provider.
